GM HT6 HD6 AC Compressor Reseal Kit 14mm + 17mm Seal INSTALL TOOL,OIL GREEN HNBR

Description

PLEASE NOTE:
PLEASE MAKE SURE THAT YOU ABSOLUTELY WANT THIS
BEFORE
COMPLETING THE TRANSACTION & PAYING FOR IT!
PAYPAL WILL NO LONGER RETURN SELLER TRANSACTION FEES ON ANY TRANSACTIONS INCLUDING CANCELLED TRANSACTIONS! I WILL NO LONGER BE ABLE TO CANCEL TRANSACTIONS!!!
__________________________________________________________________________________________________________
HT6 HD6 Compressor Gasket Reseal Kit
1
Sunair KT-HD6GN
HT6 HD6
Compressor Gasket Kit
(
GREEN HNBR Rubber
with BLACK Center housing O-Ring)
AND
1
Sunair
SK-741N Compressor
14mm
DOUBLE LIP
Shaft Seal Kit
(Shaft Seal for
14mm
compressor shafts)
AND
1 Sunair MC-1148 17mm "BARE" SHAFT SEAL
(Shaft Seal for 17mm GM Large FAT SHAFTS)
Includes BOTH a 14mm AND 17mm Seal
THIS KIT INCLUDES TWO FELT WIPER WICKS
(as seen in pictures)
BONUS
THICK Felt Wiper
cost me
.51 each
&
THIN Felt Wiper
cost me
.35 each
)
AND
Mastercool
METAL
Shaft Seal Installer / Protector Tool
AND
2
4cc
tubes of Mineral Oil
(Oil
Essential for All O-rings and Seals)
AND
***
BONUS INCLUDED
***
I have a Adobe PDF HT6 Reseal Article with information, pictures, and added tips showing an HT6 compressor being resealed.
When purchasing
this item
, I will
e-mail you a copy
of the article.
Send your e-mail address with payment to get article e-mailed to you.
____________________________________________________________________________________________________
This kit is specially packaged with a
BLACK
Center Housing
O-Ring to help you identify the Center O-Ring from the Outer Housing O-Rings.
HOUSING O-RINGS:
The
2 outer
case housing O-rings
ARE a DIFFERENT SIZE than
the
CENTER Case Housing O-ring
.
The CENTER case housing O-Ring has a SLIGHTLY LARGER outside diameter.
Please make a note of that!
________________________________________________________________
THIS KIT
is an
UPGRADE
to the standard
BLACK
NITRILE
&
NEOPRENE
Rubber
.
The
HNBR Green
O-rings
can handle
50 degrees higher temperature
than standard
Neoprene Black O-rings.
THIS
DOUBLE LIP SHAFT SEAL KIT
is considered an
UPGRADE
to the standard SINGLE LIP shaft seal kit.
We have 2 different size shaft seals kits to chose from in 2 different active listings, if needed.
These are
Premium
HNBR green o-ring
gasket & seal kits. High quality
HNBR green o-ring
as needed for R-134a
High Temperature
useage.
These are considered an
upgrade
to R-12 standard low quality Black o-rings.
HNBR green o-ring
handles about 50 degrees higher temperature.
Features & Benefits: These seals are manufactured from the highest quaility
HNBR green o-ring
material and
are compatible with R12
and
R134a
.
Don't buy lower quality BLACK o-rings or gaskets from other sellers.
"
Standard Size
" 14mm Shaft size
AND
"
GM FAT
" 17mm Shaft size
(
Shaft O.D. 14mm
) AND (
Shaft O.D. 17mm
)
Manufacturer Part Numbers:
Gasket Kit:
Sunair KT-HD6GN
Shaft Seal Kit:
Sunair SK-741N (standard 14mm seal kit)
Sunair MC-1148 (GM Fat Shaft 17mm seal)
Interchange Part Numbers:
Global Parts Distributors (GPD) 1311533
Omega MT2198, Sunair KT-HD6N
A/C Compressor Gasket Kit with
GREEN HNBR O-rings
with BLACK Center Housing O-ring as shown
fits:
GM/Harrison
HD6 and HT6  (with 14mm O.D. compressor shaft)
A/C Compressor 14mm DOUBLE Lip Seal Kit with
Neoprene
o-rings
Fits the following compressor models with BOTH "standard size" (14mm O.D.) AND 17mm O.D.) compressor shafts
- HD6,
HT6
(Shaft O.D.
14mm
)
AND
(Shaft O.D.
17mm
)
This kits includes what they call a "2nd design" standard size (14mm O.D.) Double Lip Seal and a "3rd design" GM FAT SHAFT size (17mm O.D.) Seal. The Double lip seals have an added "Rubber Lip" to aid in sealing with the primary Teflon lip Seal.
The Double lip seal is considered an upgrade to the "1st design" Teflon Single lip seal.
**Some HT6 and HU6 compressor use a "3rd design" FAT SHAFT (17mm O.D.) Double lip seal.
Both 2nd and 3rd design seals have a Teflon lip and a rubber lip.
*Most of the newer model compressors on todays newer vehicles now have "triple lip" seal.
SHAFT SEAL INSTALL TIPS
:
*** Rubber side of shaft seal goes towards the
inside
of the compressor ***
***The white felt wiper/wicks are an option to install. Many compressors don't have them installed. If you want to use the felt wiper/wick you select and use the one that fits best between the shaft seal and the clutch hub. Don't use BOTH felts. The felt wiper/wick goes on top of the seal on the outside of the compressor. You install the felt after you install the shaft seal and before you install the clutch hub. The felt is used to wick, stop, and hide a/c oil seepage  from the shaft seal area so it is not seen.  The slight seepage is a normal occurrence over time.***
HOUSING O-RING TIP:
The
2 outer
case housing O-rings
ARE a DIFFERENT SIZE than
the
CENTER Case Housing O-ring
.
The CENTER case housing O-Ring has a SLIGHTLY LARGER outside diameter.
Please make a note of that!
Torque Specs:
Compressor Factory thru bolts torque spec:
8 to 10 nm
(
newton metre)
or
72-84
inch
lbs (
NOT
foot
lbs
) =
6 to 7 Foot lbs
*Progressively torque through bolts to 72 to 84
INCH
lbs in an alternating pattern*
Manifold Hose Assembly to Compressor Mounting Bolt 28 NM or 21 Foot lbs
Clutch Hub Air Gap (free space between clutch hub & pulley) .020" to .030" inch
THE CASE HOUSING O-RINGS ARE 2
DIFFERENT SIZES
:
The
FRONT & REAR HEAD use size -155
O-Rings
AND
the
CENTER uses size -155.5
O-Ring.
Hang the Case Housing O-Rings on an object like a screwdriver or an ink pen and you WILL SEE THE
SLIGHTLY LARGER
CENTER
O-RING
. The Sunair chart showing O-Ring numbers IS wrong!
PLEASE NOTE:
ALL PICTURES ARE OF THE EXACT SEAL.  IT IS IMPORTANT TO LOOK AT THE SEAL YOU ARE REMOVING AND CALL IF YOU HAVE ANY QUESTIONS AT ALL!  VISUAL COMPARISON IS REQUIRED.  MANY SEALS FIT MORE THAN ONE COMPRESSOR OR MANY COMPRESSORS HAVE MORE THAN 1 SEAL THAT IS USED.
I AM NOT RESPONSIBLE FOR SEALS ORDERED INCORRECTLY.
Visual comparison required!
We also sell REQUIRED GM Shaft Seal Protector / Installer Tool. It IS a
REQUIRED
tool that is needed for installation of GM "Teflon" lip shaft seals for sale in another listing.
A shaft seal Protector is REQUIRED
for GM compressor shaft seal installation. The tool protects, expands, and stretches the
Teflon
(Plastic)
Lip seal to install the seal. Without the tool you WILL damage to the new shaft seal if you nick, cut, or improperly install the new seal.
The Shaft seal protector is
REQUIRED
if you are to install a seal without damaging the new seal.
Without the tool
how will you expand the Teflon Lip seal
to install it?
***Teflon seals are not like rubber seals. Teflon seal are actually manufactured with a
smaller inside diameter
than the
actual compressor shaft
.  That is why you
MUST
use this tool to properly install the new seal.
Buyers in
Continental
USA
(including Alaska & Hawaii)
get
FREE
shipping via
USPS First Class Mail
shipping, handling, and packing materials cost.
No sales outside Continental USA.
(except Alaska & Hawaii)
No sales to APO/FPO addresses.
No exceptions, No excuses, PERIOD!