Exhaust Manifold Studs & Lock Nuts For Nissan 240sx DOHC KA24DE SR20DET CA18DET

Description

[PKF]
Exhaust Manifold Studs & Lock Nuts For Nissan 240sx DOHC KA24DE SR20DET CA18DET
(FITS:
DOHC
KA24DE SR20DET CA18DET
S
eries Motors)
(Will Not Fit:
SOHC Motors
)
(8) M10x1.25 Studs
(8)
M10x1.25 Top Locking
flanged
Nuts
(2) Regular Hex nuts to properly install studs.
▪︎
Stud
Hardware
-The thread pitch is M10x1.25
-Studs are hardened (155,000+ Minimum Tensile Strength.)
-Yellow Zinc Chromate is a highly resistant commercial grade corrosion plating.
▪︎
Lock Nut Hardware
-Top Lock
flanged nuts
are self-locking nuts with uniquely shaped threads to secure the nut on the stud.
-Self-Locking nuts are special due to their ability to minimize vibrations and withstand high heat temperatures.
-Self-Locking nuts are particularly useful with exhaust manifolds where vibrations are frequent and have the likelihood
backing out with a regular flange nut. If you drive a drift daily vehicle or engine with modifications, locking hardware
is highly recommended on all your flange components.
▪︎
Installation
-Every kit comes with two regular hex nuts so you can properly install your studs using the “two nut method.”
-When installing the self-locking nut, the fastener will hand-tight to the very end of the nut and will stop.
You’ll need to use a 14mm socket or wrench to complete your installation.
▪︎
Shipping/Handling/Packaging
-Items are shipped USPS + Tracking.
-We ship same day as purchased.
Business days Monday-Friday
-Shipment Cut-Off Time 3:30pm Pacific Standard Time
-Purchased during non-business hours or holiday. Shipping will be next available day.
-Items are carefully packed and sealed for quality assurance.
▪︎
Return Policy
-All items being returned must be received by us with in 30 days of you receiving the item.
(Buyer pays return shipping) If you received an item other than what was purchased return
is free.When we receive the product in good unused condition we will send a refund for the
value of the product. 10% restocking fee may apply. (If you have any questions please email us.)
▪︎
Disclaimer
Exercise due-diligence when installing this product. [PKF] PROKIT FASTENERS does
not accept any responsibility for vehicle damage or personal injury resulting from the
improper installation of this product. Careless installation and operation can result in
injury or equipment damage. Products installation should always be installed by a
qualified technician.
“
We believe in high quality craftsmanship and ingenuity.
We're working with the best so we can deliver the best.”
Packaged and Distributed in Southern California.