AC GM Compressor Lip Shaft Seal R4 V5 HD6 HR6 HR6HE DA6 HT6 A/C DOUBLE LIP 14MM

Description

PLEASE NOTE:
PLEASE MAKE SURE THAT YOU ABSOLUTELY WANT THIS
BEFORE
COMPLETING THE TRANSACTION & PAYING FOR IT!
PAYPAL WILL NO LONGER RETURN SELLER TRANSACTION FEES ON ANY TRANSACTIONS INCLUDING CANCELLED TRANSACTIONS! I WILL NO LONGER BE ABLE TO CANCEL TRANSACTIONS!!!
__________________________________________________________________________________________________________
Made by
Sunair Products
This listing is for
only
1
14mm
shaft
seal kit
PREMIUM
DOUBLE LIP
SEAL KIT
THIS
14mm DOUBLE LIP SHAFT SEAL KIT
is considered an
UPGRADE
to the standard
Single Lip Seal
.
These are
Premium
Neoprene
o-ring
gasket & seal kits. These are high quality
o-rings
as needed for R-134a & R12 useage.
These are considered an
UPGRADE
to the Single Lip and can be used in place of the Single Lip for a better seal.
Features & Benefits: Sunair Seals are manufactured from the highest quaility material and are compatible with BOTH R12 and R134a.
For 14mm Standard Shaft Size
________________________________________________________________________________
INSTALL TIPS:
- Rubber side goes towards the
inside
of the compressor
- There are 2 o
-rings included in this Shaft Seal Kit
.
The majority of compressors use the "thinner" dimension Green HNBR O-ring.
Compare the original O-ring to the new one before installing it.
- A shaft seal Protector is
REQUIRED
for GM
Teflon
compressor shaft seal installation. The tool protects,
EXPANDS
, and
STRETCHES
the
Teflon
(Plastic)
Lip seal to install the seal. Without the tool you
WILL damage
the new shaft seal by improperly installing.
- The "inside diameter" of the new Seal is SMALLER that the ACTUAL compressor shaft.
________________________________________________________________________________
A/C Compressor
Premium
Double Lip
Shaft Seal Kit with GREEN HNBR & Neoprene o-rings fits:
This seal is for "Standard Size" Shaft outside diameter
(For compressor Shaft O.D.
14mm
only)
Manufacturer Part Number: Sunair SK-741
Interchange Part Numbers: ACDelco 15-2292, GM 2724319,
Santech K13-3025, K13-3125 K13-3126, MT2105, MT2038,
24013 Murray , 3558 FJC, 3554 FJC, 776-8
Competitor Interchange
("SOME" from the Single lip to this DOUBLE LIP:
UAC: SS 0705
General Seal: GSK205NS
Omega: K133025
Omega: SS0705
Santech: K133025
Santech: SS0705
Sunair: SK705N
Four Seasons: 24013
General Seal: GSK205HS
Global Parts Distributors: 1311245
NAPA: 207256
NAPA: TEM207256
Omega: K133125
Omega: MT2038
Omega: SS0705R134A
Santech: MT2038
Santech: SS0705R134A
Sunair: SK705G
Visteon: 61001
UAC: SS 0868
General Seal: GSK241NS2
Omega: K133026
Santech: K133026
Sunair: SK741N
A/C Compressor Teflon Lip Seal Kit with
Neoprene
o-rings
Fits the following compressor models
with
"standard size"
14mm
compressor shaft:
Calsonic
V5-15, V5-15C, V5-15F, V5-15G
GM/Harrision
V5, V5 (DESTROKER),
R4, LTR4, DA6, HD6, HR6, HR6HE,
HT6
(Shaft O.D. 14mm)
, H-Series, A6 "retrofit" (please see notes below regarding A6 compressors)
***USE SOME COMMON SENSE HERE PEOPLE!!!!
DOES NOT FIT ANY COMPRESSOR with a GM
"FAT SHAFT" 17mm
Shaft and or 17mm Shaft Seal regardless of the actual compressor model.
Design Description:
This kits includes what they call a "2nd design" standard size (14mm O.D.) Double Lip seal.
The Double Lip Seal has an added Rubber Lip to aid in sealing with the Teflon Lip.
The Double lip seal is considered an upgrade to the "1st design" Teflon Single Lip Seal.
**Some HT6 and HU6 compressor use a "3rd design" FAT SHAFT (17mm O.D.) Double Lip Seal.
Both 2nd and 3rd design seals have a Teflon lip and a rubber lip.
Most newer model compressors on newer vehicles now have "Triple Lip" seals.
A6 Compressors and 2 Piece "early model" R4 compressors -
Read below:
This seal kit as well as the single lip seal kit
can
be used in A6 compressors and in early model R4 compressors replacing the regular 2 piece type carbon seal. If using this seal in an A6 compressor or an EARLY Model R4 with a 2 piece seal, this seal would then replace the "ceramic seat" or "metal seat". This would upgrade the old style original carbon seal to the new style "Teflon" lip seal used in todays a/c compressors.
Carbon shaft seals are more leak prone and have a higher leakage rate as compared to Teflon single and double lip seals.
The A6 compressors and the 2 piece "early model" R4 compressors ceramic seat is the same size and dimensions of this 14mm single lip seal
and
the 14mm double lip seal.
IT HELPS TO PRECONDITION THE SEAL FIRST BEFORE INSTALLING IT.
Links showing the use of the shaft seal installer/protector in use:
"Watch the first below R4 seal install video from the "8 minute" mark & turn your speakers on to understand proper use of tool as well as how to pre-stretch the Teflon seal to ease installation while protecting the Teflon lip"
https://www.youtube.com/watch?v=vImsu-D_Qnk&index=1&list=TL2nGpxAbjEUI
PLEASE NOTE:
ALL PICTURES ARE OF THE EXACT SEAL.  IT IS IMPORTANT TO LOOK AT THE SEAL YOU ARE REMOVING AND CALL IF YOU HAVE ANY QUESTIONS AT ALL!  VISUAL COMPARISON IS REQUIRED.
MANY SEALS FIT MORE THAN ONE COMPRESSOR AND MANY COMPRESSORS HAVE MORE THAN 1 SEAL THAT IS USED FOR EACH MODEL
.
I AM NOT RESPONSIBLE FOR SEALS ORDERED INCORRECTLY.
PLEASE NOTE:
ALL PICTURES ARE OF THE EXACT SEAL.  IT IS IMPORTANT TO LOOK AT THE SEAL YOU ARE REMOVING AND CALL IF YOU HAVE ANY QUESTIONS AT ALL!  VISUAL COMPARISON IS REQUIRED.
MANY SEALS FIT MORE THAN ONE COMPRESSOR AND MANY COMPRESSORS HAVE MORE THAN 1 SEAL THAT IS USED FOR EACH MODEL
.
I AM NOT RESPONSIBLE FOR SEALS ORDERED INCORRECTLY.
Visual comparison required!
****We stock V5/V7 "
Rubber Mount Seals
" (rubber coated metal seal) for those needing the rubber mount seal.
The rubber mount seal cost the same as this listed seal does
.
The V5/V7 rubber mount seal is
not as popular
as the
regular
metal single lip seal
and
double lip seal
. **** That is why I don't even have a listing for them.
We have NEW GM Seal Protectors as
REQUIRED
for installation of GM shaft seals also available for sale. The Mastercool part number is
90484.
A shaft seal Protector is
REQUIRED
for GM
Teflon
compressor shaft seal installation. The tool protects,
EXPANDS
, and
STRETCHES
the
Teflon
(Plastic)
Lip seal to install the seal. Without the tool you
WILL damage
the new shaft seal by improperly installing it.
The Shaft seal protector is
REQUIRED
if you are to install a seal without damaging the new seal.
Without the tool
how will you expand the Teflon Lip seal
to install it?
Teflon seals are not like rubber seals. Teflon seal are actually manufactured with a
smaller inside diameter
than the
actual compressor shaft
.  That is why you
MUST
use this tool to properly install the new seal.
Buyers in
Continental
USA
(including Alaska & Hawaii)
get
FREE
shipping via
USPS First Class Mail
shipping, handling, and packing materials cost.
No sales outside Continental USA.
(except Alaska & Hawaii)
No sales to APO/FPO addresses.
No exceptions, No excuses, PERIOD!